用户登录 >>  用户名:   密码:   注册
首页
信息咨询
技术工艺
设备机械
电话会议
会议展览
短信平台
贸易机会
数据库
报告下载
招聘猎头
塑料薄膜: BOPP | CPP | BOPET | BOPA 胶带产业: 胶带膜 | 丙烯酸及酯| VIP 专区 彩印专区: 新闻 | 技术 | 分析 | 行情 | 政策 国际频道
塑料原料: PE | EVA | PP | 粉料 溶剂油墨: 醇类 | 芳烃 | 酮类 | 醋酸及酯 软包基材: 双拉 | 流延 | 镀铝 | 吹膜 | 阻隔 原油专区
您现在的位置:首页 >> 会议展览 >> 行业会议 >> 正文

关于召开2014 流延薄膜行业市场与技术发展研讨会

更新时间:2014-10-16 09:10:31 来源:中国塑膜网编辑部

 

中国塑料加工工业协会流延薄膜专委会
中塑流延专〔2014〕第5
 
关于召开2014 流延薄膜行业市场与技术发展研讨会
 
各有关单位:
为了促进流延薄膜(CPPCPEPVBEVATPU等)行业的健康发展与市场推广,鼓励技术创新和开发高品质、差异化的产品,促进新设备、新工艺、新技术、新产品的应用,同时深入研究行业存在问题与对策,中国塑协流延薄膜专委会决定于2014121213日在广东省汕头市召开“2014 流延薄膜行业市场与技术发展研讨会,本次会议由广东金明精机股份有限公司承办,诺德美克(上海)机械有限公司、广州思肯德电子测量设备有限公司、伊斯拉视像设备制造(上海)有限公司、威海海朝机械有限公司提供赞助。现将会议有关事项通知如下:
一、研讨会主要内容
1、流延薄膜行业市场2014年市场状况分析;
2、流延薄膜新产品介绍;
3、流延薄膜生产企业生产经营经验介绍;
4PVB玻璃夹层膜国家标准解析;
5、流延薄膜原辅材料介绍;
6、流延薄膜检测技术介绍;
7、重点探讨流延薄膜企业面临的困难,分析行业存在问题,积极研究行业改革发展对策;
813日下午安排参观广东金明精机股份有限公司流延薄膜、吹膜、淋膜、涂布生产线;
914日组织参会代表赴广州参观1215-17“2014 中国国际塑料新材料、新技术、新装备、新产品展览会薄膜展示专区。
二、资料准备
为开好会议,请部分企业做好交流资料准备(见附件一),将撰写的论文,于1020日前通过电子邮件发给我专委会。
三、参加人员
1、流延薄膜(CPPCPEPVBEVATPUPVC等)生产企业的负责人;
2、流延薄膜生产企业的设备、技术、销售、管理等人员;
3、流延薄膜配套的国内外设备、备品备件和原辅材料生产等企业和机构的负责人;
4、有意投资流延薄膜行业的企业负责人;
5、复合彩印、太阳能光伏、夹层玻璃等生产企业的代表;
6、国外有关公司的代表。
四、会议日期和地点
20141212报到,13日开会,14日上午乘车赴广州参观1215-17“2014 中国国际塑料新材料、新技术、新装备、新产品展览会薄膜展示专区。
报到地点:金海湾大酒店    地址:广东省汕头市金砂路96
酒店联系:0754-88263263。销售部:苗健经理,13502735889
乘车路线:1)火车站、汽车中心客运站:距离酒店约8公里,乘2路、6路、38路公交车,到金海湾大酒店站下车。2)汽车总站:距离酒店约5公里,乘38路公交车,到金海湾大酒店站下车。3)潮汕机场:距离酒店约40公里,乘机场快线,到奋发园站下车后坐出租车起步价到。
五、收费原则
会务费包括会议、就餐、资料费及参观交通费、企业宣传资料费等。
为鼓励薄膜等塑料制品生产企业积极参加会议,并切实服务于会员,决定采取以下对会员企业优惠的政策:
1、流延薄膜生产企业、薄膜经销商及下游用户:免收会务费
2、国内外流延薄膜设备、分切机企业,国内外原料生产企业:非会员企业收取每人1200元会务费,会员企业每人收取1000元会务费
3、国内备品备件、辅助材料、原料贸易、商务网站、检测机构、科研院所等配套企业:非会员企业收取每人800元会务费,会员企业每人600元会务费
4、住宿费用由各会议代表自己承担,会议所在地金海湾大酒店(五星)房间价格为:标准双人房300元/天,标准大床房400元/天,高级双人房400元/天,高级大床房450元/天,由代表自行选择。
参加者请于1110日前将会议回执表(见附件二)通过传真、电子邮件等方式返回流延薄膜专委会,联系方式如下:
人:孙冬泉 苗丹 郭书丽 王佳仁
    话:010—68693004 68679731 68695004
    机:13522995809(孙)13693019207(苗)18210186251(郭)
    真:010—68691047  68693389
    箱:ppack@126.com ppack@ppack.cn
 
 
                                     中国塑料加工工业协会
                                           流延薄膜专委会
                                     二零一四年八月二十日
 
附件一:会议部分演讲题目及人员
附件二:参加会议回执表
 
附件一:
会议部分演讲题目及人员
 
开幕致辞
………………………………………………中国塑料加工工业协会领导 待 定
欢迎致辞
………………………………………广东金明精机股份有限公司董事长 马镇鑫
CPP薄膜行业2014年发展情况及2015年市场预测
…………………………………………中国塑协流延薄膜专委会理事长 王焕清
佛塑科技集团流延薄膜新产品介绍
……………………………………佛山市佛塑科技集团有限公司副总裁 王 磊
流延薄膜在农业、包装等领域的新应用
……………………………………广东金明精机股份有限公司技术经理 王 全
TPU薄膜行业2014年发展现状分析
…………………………………东莞市雄林新材料科技有限公司董事长 何建雄
PVB玻璃夹层膜行业2014年发展情况以及PVB国家标准解析
…………………………………………浙江皕盛塑胶有限公司总工程师  佟春涛
缠绕膜行业企业如何应对当前经济形势
……………………………………深圳市粤斯特实业有限公司副总经理 严志辉
PVC保鲜膜行业2014年发展现状与2015年前景预测
………………………………………沧州市金三洋塑业有限公司总经理 赵 鹏
诺德美克镀膜和复合解决方案
…………………诺德美克(上海)机械有限公司工艺专家  Fabiano Rimediotti
测厚仪在流延薄膜生产线上的高级应用
…………………广州思肯德电子测量设备有限公司销售及服务工程师 王大华
视觉检测系统在透明塑料薄膜上的最新技术
…………………………伊斯拉视像设备制造(上海)有限公司销售经理 杨雄伟
长效过滤器如何帮助流延膜生产降低成本
……………………………………………威海海朝机械有限公司总经理 赵福长
会议期间还将重点探讨流延薄膜行业2014年面临的实际困难,积极研究2015年行业发展对策。
附件二:
 参加2014 流延薄膜行业市场与技术发展研讨会回执表
 
 
性别
职务
电话
传真
手机号码
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
单位
 
 
地址
 
 
 
 
是否住宿
 
是否合住
 
 
备注:1、请将上述回执表于20141110日前传真到流延薄膜专委会010-6869104768693389
2、有意在“2014 中国国际塑料新材料、新技术、新装备、新产品展览会薄膜展示专区展示企业产品请与流延薄膜专委会联系。
 
 
Cast Film Professional Committee of CPPIA
Notification of Marketing and Technology Development Conference of Cast Film Industry 2014
                        Cast Film Professional Committee of CPPIA2014No.5
 
 
In order to promote the healthy development of cast film industry including CPPCPEPVBEVATPU etc, encourage technical innovation and the R&D of high-quality and differentiated products, promote the application of new equipment, new technology, new products, deeply discuss the existing problems and explore countermeasures, the Cast Film Professional Committee of China Plastics Processing Industry AssociationCPPIAwill convene the Marketing and Technology Development Conference of Cast Film Industry 2014 from Dec. 12th to 13th, 2014 in Shantou City, Guangdong Province. This conference is undertaken by Guandong Jinming Machinery Co., Ltd. Nordmeccanica Machinery (Shanghai) Co.,Ltd., Guangzhou Scantech Electronic Measuring Equipment Co. Ltd., ISRA Vision AG are the main sponsors.
The related conference items are notified as following:
1. Main contents to be introduced, analyzed, discussed and explored:
  (1) market status of cast film industry in 2014,
(2) new species of cast film,
(3) the production and management experience of the cast film production enterprises,
(4) analysis of national standard of PVB film for laminated safety-glass
(5) raw and auxiliary materials for the production of cast film,
(6) measurement technology for cast film,
(7) the difficulties faced by cast film production enterprises, the existing problems, and the possible countermeasures,
Besides, all the delegates will visit Guandong Jinming Machinery Co., Ltd in the afternoon of Dec.13, leave Shantou to Guangzhou in the morning of Dec. 14 to visit Film Area of Chinanewplas 2014 ((2014 China International Plastics New Material, New Technology, New Equipment, New Products Exhibition) during Dec.15 and 17.
2. Documents preparation
All the conference delegates listed in the attachment are kindly required to email us the thesis before Oct. 20th.
  3. All the professionals of the following scopes are welcome to participate:
 (1) principals of cast film production enterprises covering CPP, CPE, PVB, EVA, TPU and PVC etc.
  (2) equipment managers, technicians,  sales staff, and administrators etc of cast film production enterprises,  
 (3) principals from the supporting equipment, spare parts and raw materials enterprises at home and abroad,
  (4) potential investors,
 (5) representatives from printing, photovoltaic solar,  laminated glass production enterprises,
  (6) and the representatives from associated foreign companies.
4. Date and Venue
Registration:  Dec. 12th, 2014
Conference:  Dec. 13th, 2014
Withdrawl: in the morning of Dec. 14th , all the conference delegates will leave Shantou to Guangzhou in the morning of Dec. 14 to visit Film Area of Chinanewplas 2014 ((2014 China International Plastics New Material, New Technology, New Equipment, New Products Exhibition) during Dec.15 and 17.
Conference Venue:  Golden Gulf Hotel
     Address: No.96, Jinsha Avenue, Shantou, Guangdong province, China
Hotel manager: Miao Jian
 Tel: 0086-754-88263263
Mobile: 0086-13502735889
Transportation
1the railway station and the bus passenger station is 8km from the Golden Gulf Hotelto take bus No. 2, bus No. 6, and bus No.38 to the Golden Gulf Hotel station.
2the bus terminal is about 5 km from the Golden Gulf Hotel: to take bus No.38 to the Golden Gulf Hotel station.
3Chaoshan airport is about 40 km from the Golden Gulf Hotel: to take airport express to Feng Fa Yuan stationand then take taxi to the Golden Gulf Hotel station with flag-fall price.
 
5. Charging principle
The conference registration fee is composed of dining, documents expenses and conference room rental etc. In order to encourage the participation of the film production enterprises, the charging principle is developed as following:
(1) The cast film production enterprises, the film dealers, and the downstream clients are exempted of registration fee.
(2) Conference delegates from our membership cast film equipment providers, slitter suppliers, and raw materials enterprises at home and abroad will pay 1,000 Yuan per capita. Delegates from the non-membership engaged in the above-mentioned business will pay 1,200 Yuan per capita.
 (3) Conference delegates from our membership companies and organizations engaging in producing and trading of spare parts, auxiliary materials, raw materials traders, websites, testing institutions, scientific research institutes will pay 600 Yuan per capita. Delegates from non-membership enterprises and organizations engaging in the above-stated business will pay 800 Yuan per capita.
(4) Accommodation will be covered by the delegates themselves. Room prices at Golden Gulf Hotel: 300 Yuan/standard double-bed room, 400 Yuan/ standard king-size bed room, 400 Yuan/ superior double-bed room, 450 Yuan/ superior king- size bed room.
All the potential attendees are kindly required to fax or email the conference registration form (in attachment 2) back to us before Nov. 10th.
 ContactsSun Dongquan, Miao Dan, Guo Shuli, Wang Jiaren
Address No.11, Dacheng Road, Fengtai District, Beijing
Postcode100141
  Tel01068693004    68679731    68695004
  Mobile13522995809Sun 13693019207Miao18210186251Guo
  Fax01068691047    68693389
  Emailppack@ppack.cn   ppack@126.com
 
                                    Cast Film Professional Committee
of China Plastics Processing Industry Association
                                               Aug. 20th, 2014
 
 
Attachment 1Speech List of Marketing and Technology Development Conference of Cast Film Industry Chain 2014 (part)
Attachment 2Confirmation Table of Marketing and Technology Development Conference of Cast Film Industry Chain 2014
 
Attachment 1
Speech List of Marketing and Technology Development Conference
of Cast Film Industry Chain 2014 (part)
Opening Speech
…………One official of China Plastics Processing Industry Association,Pending
Welcome Speech
…………………………………Ma Zhenxin, Director of Board of Guandong Jinming Machinery Co., Ltd.
Development of CPP Film Industry in 2014 and the Forecast into 2015
……………………………………Wang Huanqing, chairman of Cast Film Professional Committee of CPPIA
Introduction of New Species of Cast Film of FSPG HI-TECH CO., LTD.
………………………………Wang Lei, vice president of FSPG HI-TECH CO., LTD. 
Application of Cast Film to Agriculture and Packaging Sector
………………………………Wang Quan, Technical manager of Guandong Jinming Machinery Co., Ltd.
Analysis of Development of TPU Film Sector in 2014
……………………………He Jianxiong, Director of Board of Dongguan Xionglin New Materials Co., Ltd.
Development of PVB Film for Laminated Safety-glass in 2014 and Analysis of National Standard of PVB Film for Laminated Safety-glass
…………Tong Chuntao, Chief Engineer of Zhejiang Bi Sheng Plastic Co., Ltd.
How Should Wrapping Film Sector Overcome the Sluggish Economy Situation
………………Yan Zhihui, Vice General Manager of Shenzhen YOST Industrial
Development of PVC Cling Film Sector in 2014 and the Forecast into 2015
…………………………………Zhao Peng, General Manager of Cangzhou Jinsanyang Plastics Industry Co., Ltd.
Metaling and Composite Solutions Invented by Nordmeccanica Machinery
………………Fabiano Rimediotti, Technology Expert of Nordmeccanica Machinery (Shanghai) Co., Ltd.
Senior Application of Thickness Gauge to Biaxially-oriented Film Production Line
…………………Wang Dahua, Sales Engineer ofGuangzhou Scantech Electronic Measuring Equipment Co. Ltd.,
The Latest Developed Vision Inspection Applied to Transparent Plastic Film
……………………………………Yang Xiongwei, sales manager of ISRA Vision AG
During the conference, all the delegates will discuss the challenges faced by the cast film sector in 2014 and work out the counter measures in 2015.
 
Attachment 2
Confirmation Table of Marketing and Technology Development Conference
Of CastFilm Industry Chain 2014
 
Name
Gender
Position
Tel.
Fax.
Mobile
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Company
 
 
Address
 
 
E-mail
 
 
Accommodation or not ?
 
Sharing a room or not ?
 
PC
 
 
Notes1.Please fill out the confirmation table in detail and fax or e-mail it to us before Nov. 10th, 2014.   Fax: 0086-10-68691047 or 68693389.
2. Those companies who are intended to exhibit the products at the Film Area of Chinanewplas 2014 (2014 China International Plastics New Material, New Technology, New Equipment, New Products Exhibition) during Dec. 15th and 17th are welcome to contact us.
 


国际频道
中文简介 | 英文简介 | 网上订阅 | 企业建站 | 联系我们 | 相关法律
本网站内容归 中国塑膜网版权所有2006 未经授权禁止转载、复制、摘编及建立镜像,违者必究法律责任。

本站最佳浏览分辨率1024x768 京ICP备18020878号-2

总编:胡晓娜  咨询热线:010-57107797  手机:13718158256  邮箱:pfchina@126. com